Function Description Of File And Simulation - Delta Electronics PCI-M324 User Manual

PCI-M324 User Guide

6.5 Function description of File and Simulation

1. Function to load / save configuration file
When you have completed the motion control, you can save the M324 motion control parameters
by using [File] > [Save Configuration_M324] in the function menu. When you open EzDMC the
next time, you can use [File] > [Load Configuration_M324] in the function menu to load the set
motion control parameters to EzDMC, and execute the motion control of this configuration.
Please refer to Figure 6.5.1 for the function menu as described above.
2. Interrupt Configuration function page
Click Interrupt Configuration (Figure 6.5.2) on the M324 main screen to operate the interrupt
function. Once you click this button, the [Interrupt Configuration] setting screen (Figure 6.5.3)
pops up. Check the conditions for interruption and when the conditions are met, interruption
occurs and enters the callback function, and the [Interrupt Status] screen shows the number of
times that interruption occurred (Figure 6.5.4).
November, 2017
Figure 6.5.1 Function to load / save configuration file
Figure 6.5.2 Function buttons
Figure 6.5.3 Interrupt Configuration setting page
EzDMC Functions
6
6-7