EzDMC Functions
6.1 Introduction to EzDMC functions
As shown in Figure 6.1.1, once you launch EzDMC, the program screen as shown below
6
appears on your computer system. Please refer to the following table for the functions of
each block.
(5)
No.
(1)
(2)
(3)
(4)
(5)
6-2
(1)
(3)
Function menu.
Tool bar for basic operating functions.
Area for displaying the main controller system and expansion module list.
Area for displaying the basic messages of expansion functions and operation control.
It operates in SDI mode which can display multiple relevant information dialog box.
Program status display area: area for displaying the connection status of the system (for
the DMC motion card).
(2)
Figure 6.1.1
Function
PCI-M324 User Guide
(4)
November, 2017