Redial Example Using Phone Key From Pre-Dial Mode - VTech PDL GX Manual

V
TECH
TITLE PDL GX Internal Product Specification
MODEL PDL GX
Note: When Redial numbers are recalled from memory in pre-dial mode using the SELECT key,
they are automatically appended to any digits already entered on the display. To ensure that only
the redial number will be dialed, the user should ensure that no digits appear in the pre-dial
display before recalling the redial number entry. See Section 3.4 Using SELECT or PHONE key
When Recalling Numbers From Memory for more details.
After recalling and editing the desired redial number, the user can press the PHONE key to go off hook
and immediately dial the number on the display.
While in pre-dial mode, the user can directly recall and dial the desired redial number, by scrolling to the
desired redial location and then pressing the PHONE key.
previously entered pre-dial digits, go off-hook, and immediately dial the number in the redial location
exactly as displayed.
When recalling redial numbers in live-dial mode, press either the PHONE key or the SELECT key and this
will immediately dial the number in the selected redial location. Note that in live-dial mode, any recalled
redial number will be appended to any digits already dialed.
To exit from Redial review without recalling the telephone number, press the OFF key. The user is then
returned to the menu selection mode.

3.6.1.1 Redial Example Using PHONE key from Pre-Dial Mode:

Assume that the user has made 4 previous telephone calls to the following numbers in the following order:
233 4566, 876 1356 , 455 5677 and 257 3356.
Phone State: Idle Mode (On-Hook).
1. To recall the 3rd most recent dialed number from the redial
memory, the user first presses the SELECT key and the
following menu item is displayed:
2. The user presses the SELECT key again in order to enter the
REDIAL MEMORY function. The phone number of the last call
made is displayed:
3. To select the 3rd most recently dialed number, the user scrolls
back through the redial list by pressing the
number R3 is found:
4. The user presses the PHONE key to dial the number and
complete the call.
Reference: PRC 00DM
This document is proprietary to V
Specifications are preliminary and are subject to change without notice.
E
NGINEERING
key until record
Revision: 3.0
E C L
TECH NGINEERING ANADA
C L
ANADA
This will cause the telephone to clear any
SFEJBM SFEJBM SFEJBM SFEJBM
NFNPSZ NFNPSZ
NFNPSZ NFNPSZ
S2!3684467 S2!3684467
S2!3684467 S2!3684467
S4!9872467 S4!9872467
S4!9872467 S4!9872467
!9872467] !9872467]
!9872467] !9872467]
.
TD
IMITED
Page: 23 of 56
26649