Live-Dial Recall Using Phone Or Select Key; Placing A Call On Hold - VTech PDL GX Manual

V
TECH
TITLE PDL GX Internal Product Specification
MODEL PDL GX

3.4.3 Live-Dial Recall Using PHONE or SELECT Key

1. User presses PHONE key to go off-hook and dials the a
telephone number in live-dial mode (e.g. 2245555):
2. The user recalls a number from a redial location R2 which has
the number 3334422 stored in it. (See Section 3.6.1
Review/Recalling Most Recently Dialed Numbers from Redial
Memory).
3. User presses PHONE or SELECT key while still in live-dial.
The recalled number is dialed out and the display shows the
previously dialed number plus the appended recalled redial
number.

3.5 Placing A Call on Hold

The user can place the call on HOLD when in Live-dial model.
destination but with the incoming, and outgoing audio muted. An example of how to place a call on HOLD
is shown below:
Phone State: In Use Mode (Off-Hook)
4. Press the SELECT key in order to activate the menu. The
following will be displayed:
2. The user presses the SELECT key again in order to place the
call on HOLD and the following will be displayed while the call is
on hold:
The IN USE/CHARGING LED on the base unit will also flash GREEN twice per second to indicate the hold
condition at the base station.
To cancel the hold condition the user can simply press the PHONE key or the OFF key. The user also
has the option to terminate the current call on hold by simply cradling the handset into the base unit.
Reference: PRC 00DM
This document is proprietary to V
Specifications are preliminary and are subject to change without notice.
E
NGINEERING
Revision: 3.0
E C L
TECH NGINEERING ANADA
C L
ANADA
!3356666] !3356666] !3356666] !3356666]
S3!4445553 S3!4445553 S3!4445553 S3!4445553
!3566664445 !3566664445 !3566664445 !3566664445
!553] !553]
!553] !553]
This keeps the connection to the
DBMM!IPME DBMM!IPME DBMM!IPME DBMM!IPME
GFBUVSF GFBUVSF GFBUVSF GFBUVSF
DBMM!PO!IPME DBMM!PO!IPME DBMM!PO!IPME DBMM!PO!IPME
.
TD
IMITED
Page: 21 of 56
26649