Dial Modes; Set Dial Mode; Temporary Tone Dialing - VTech IS8128 User Manual

Dial modes

Set dial mode

The dial mode is preset to touch-tone
dialing. If you have pulse (rotary) service,
you need to change the dial mode to
pulse dialing before using the telephone
to make a call.
Using a cordless handset or telephone
base:
1. Press MENU/SELECT when the phone
is not in use.
2. Press q CID or p
Settings,
MENU/SELECT to select.
3. Press q CID or p
mode, and then press MENU/SELECT
to select.
4. Press q CID or p
Touch-tone or Pulse, and then press
MENU/SELECT to select.
to choose
and then
to choose Dial
to choose

Temporary tone dialing

If you have pulse (rotary) service only,
you can switch from pulse to touch-tone
dialing temporarily during a call. This is
useful if you need to send touch-tone
signals to access your telephone banking
or long distance services.
Using a cordless handset or telephone
base:
1. During a call, press
2. Use the dialing keys to enter the
number.
• The telephone sends touch-tone
press
signals.
• The
returns to pulse dialing mode after
you end the call.
104
.
telephone automatically