Dial Modes; Pre-Seizure (On-Hook) Dialing Or Pre-Dial; Pre-Dial Digit Entry And Editing - VTech PDL GX Manual

V
TECH
TITLE PDL GX Internal Product Specification
MODEL PDL GX

3.3 Dial Modes

3.3.1 Pre-Seizure (On-Hook) Dialing or Pre-Dial

Pre-Seizure dialing or Pre-dial refers to a mode of operation where the user enters a phone number or
recalls a number from memory to be dialed prior to going off hook or seizing the line.

3.3.1.1 Pre-Dial Digit Entry and Editing

When the handset is idle and in on hook mode, the user can enter the digits of the phone number using
the keys 0 through 9 and the
user can press and hold the # key. A P will be displayed after 1 second and this indicates a pause interval
of 1 second. A total of 20 digits can be entered using pre-dial.
To delete a digit the user can press the
cursor is always positioned to right of the last digit on the display. To delete the entire display, press the
OFF key.
The following shows a sample display of a user entered phone number.
Note: The on hook status is indicated by the cursor as an underscore when pre-dialing
As a general rule in pre-dial mode, the user can append to the displayed pre-dial digits with a phone
number recalled from CID, Speed Dial or Redial memory up to the maximum of 20 digits.
To dial the telephone number displayed on the LCD, press the PHONE key.
Reference: PRC 00DM
This document is proprietary to V
Specifications are preliminary and are subject to change without notice.
E
NGINEERING
and # keys. If a dial pause is required in the phone number string, the
key. The digit to the left of the cursor will be deleted. The
!:3684467` !:3684467` !:3684467` !:3684467`
E C
TECH NGINEERING ANADA
C L
ANADA
On Hook
Cursor
Revision: 3.0
L .
TD
IMITED
Page: 17 of 56
26649