Deleting A Speed Dial Location In Review Mode - VTech PDL GX Manual

V
TECH
TITLE PDL GX Internal Product Specification
MODEL PDL GX

3.9.3 Deleting a Speed Dial Location in Review Mode

While reviewing any of the Speed Dial location in on-hook mode, the user has the ability to delete the
speed dial location in view. The user presses and holds the 0 key and will be acknowledged with a
KEYCLICK and the LCD will display the following message:
To abort the deletion of the speed dial location, the user must press the OFF key. To proceed with the
deletion, the user must press the 0 key again. A KEYCLICK will be generated to indicate the deletion of
the speed dial followed by the message:
This message will be removed once deletion has completed. The user is then returned back to Speed
Dial review with the current location containing blanks signifying that it is empty. To clear all Speed Dial
memory refer to Section 3.10 Clearing CID, Speed Dial Memory and VMWI.
Reference: PRC 00DM
This document is proprietary to V
Specifications are preliminary and are subject to change without notice.
E
NGINEERING
EFMFUF!TQE@ EFMFUF!TQE@ EFMFUF!TQE@ EFMFUF!TQE@
1>ZFT!PGG>OP 1>ZFT!PGG>OP 1>ZFT!PGG>OP 1>ZFT!PGG>OP
T12!EFMFUFE T12!EFMFUFE
T12!EFMFUFE T12!EFMFUFE
Revision: 3.0
E C L
TECH NGINEERING ANADA
C L
ANADA
.
TD
IMITED
Page: 35 of 56
26649