Table of Contents
Advertisement
Dial mode
The dial mode is preset to touch-
tone dialing. If you have pulse (rotary)
service, you need to change the dial
mode to pulse dialing before using the
telephone to make a call.
1. Press MENU when the phone is not
in use.
2. Press
or
to choose Settings,
and then press SELECT.
3. Press
or
to choose Dial mode,
and then press SELECT.
4. Press
or
to choose Touch-tone
or Pulse.
5. Press SELECT to save your
selection. Then the handset returns
to the previous menu. You hear a
confirmation tone.
Temporary tone dialing
If you have pulse (rotary) service only,
you can switch from pulse to touch-tone
dialing temporarily during a call. This
is useful if you need to send touch-
tone signals to access your telephone
banking or long distance services.
1. During a call, press
.
2. Use the dialing keys to enter the
number. The telephone sends
touch-tone signals. The telephone
automatically returns to pulse dialing
mode after you end the call.
Telephone Operations
Handset control key panel:
10
Make a call
1. Press
or
on the handset.
2. When you hear a dial tone, dial the
number.
• The handset displays Unable to
call if the telephone line is in use.
NOTES
• The handset shows the elapsed time as
you talk (in hours, minutes and seconds).
• While entering numbers, press and hold
PAUSE to insert a dialing pause
(a p appears).
Predial a call
1. Enter the telephone number.
2. Press
or
to dial.
NOTES
• The handset displays Unable to call if
the telephone line is in use.
• The handset shows the elapsed time as
you talk (in hours, minutes and seconds).
• While entering numbers, press DELETE
or CANCEL to make corrections;
press and hold PAUSE to insert a dialing
pause (a p appears).
Answer a call
Press
,
, or any dialing key (0-9,
or
) to answer.
,
End a call
Press OFF on the handset, or place the
handset in the telephone base or
handset charger.
Speakerphone
During a call, press
to switch
between the speakerphone
and the handset earpiece. When the
speakerphone is active, the handset
displays Speaker.
Volume
During a call, press
/VOLUME/
adjust the listening volume.
NOTES
• The handset and speakerphone volume
settings are independent.
• When the volume reaches the minimum
or maximum setting, you hear two beeps.
Mute
The mute function allows you to hear
the other party but the other party
cannot hear you.
• During a call, press MUTE. The
handset displays Muted until the
mute function is turned off.
• Press MUTE again to resume the
conversation. The handset briefly
displays Microphone on.
Join a call in progress
You can use up to two system handsets
at a time on an outside call.
• When a handset is already on a call,
press
or
on another handset to
join the call.
• Press OFF or place the handset
in the telephone base or handset
charger to exit the call. The call
continues until all handsets hang up.
NOTE
• If you have paired a DECT 6.0 cordless
headset and speakerphone to the
telephone base, you can also join a call
in progress using the paired device. Refer
to the user's manuals of the respective
product for more information.
11
to
Advertisement
Table of Contents
