Deleting A Cid Record In Review Mode - VTech PDL GX Manual

V
TECH
TITLE PDL GX Internal Product Specification
MODEL PDL GX

3.8.6 Deleting a CID Record in Review Mode

While reviewing any of the CID record, the user has the ability to delete the current CID record in view.
The user presses and holds the 0 key and will be acknowledged with a KEYCLICK and the LCD will
display the following message:
To abort the deletion of the call record, the user must press the OFF key. To proceed with the deletion,
the user must press the 0 key again. A KEYCLICK will be generated to indicate the deletion of the CID
record followed by the message:
This message will be removed once deletion has completed. The user is then returned back to CID
review. The next oldest CID record will shift into the deleted location. For example if the user deletes
location 5, previous location 6 is shifted to 5, previous location 7 is shifted to location 6, and so on. To
clear all CID memory, refer to Section 3.10 Clearing CID, Speed Dial Memory and VMWI.
Reference: PRC 00DM
This document is proprietary to V
Specifications are preliminary and are subject to change without notice.
E
NGINEERING
EFMFUF!DBMM@ EFMFUF!DBMM@ EFMFUF!DBMM@ EFMFUF!DBMM@
1>ZFT!PGG>OP 1>ZFT!PGG>OP
1>ZFT!PGG>OP 1>ZFT!PGG>OP
EFMFUJOH EFMFUJOH EFMFUJOH EFMFUJOH
TJOHMF!DBMM TJOHMF!DBMM
TJOHMF!DBMM TJOHMF!DBMM
Revision: 3.0
E C L
TECH NGINEERING ANADA
C L
ANADA
.
TD
IMITED
Page: 30 of 56
26649