Vox Connection; Mic Hook - Kenwood TS-700A Operating Manual

2-8. VOX CONNECTION
Your TS-700A can also be used for VOX operation in
SSB or FM mode by connecting VOX-3 (option) to the 9-pin
socket on the rear panel. For VOX operation, refer to the
sub-paragraph 4-10 "VOX Operation".
When VOX-3 is not connected, be sure to insert the 9-
pin plug provided into the VOX socket; otherwise, the
transceiver cannot be set in the transmitting mode.
Microphone
pe 3lB }—
Matching transformer
(a) Unsuitable for PTT operation
wesle
Matching transformer
-—
\ Switch
Fig. 2 A suitable PTT Microphone
(b) Suitable for PTT operation
2-9. MIC HOOK
Attach a microphone hook to the case following the
instructions give in fig. 4. The hook is furnished with the
equipment.
HOLE OF
MIC HOOK case
SCREWS
Fig. 4 Mounting of Microphone Hook
Seen from the cord.
Microphone
Fig. 3 Microphone connector Wiring