Beep Tone; Squelch Level - Kenwood NX-P500 User Manual

BEEP TONE

When you press a button, a beep will emit from the transceiver.
To turn the beep tone on or off:
1
Enter the Setting mode {p.37}.
2
Press the
3
Press the Menu button then press the
value.
OFF
~
1 ~ 31
Volume
4
Press the Menu button to confirm the selection, then press the PTT switch or
the Side button to return to the operation mode.

SQUELCH LEVEL

You can adjust the default squelch level of the transceiver.
1
Enter the Setting mode {p.37}.
2
Press the
3
Press the Menu button then press the
value.
~
Note:
◆ In digital operation, Squelch Level is fixed at level 1.
4
Press the Menu button to confirm the selection, then press the PTT switch or
the Side button to return to the operation mode.
or button to select "
No beep sounds.
Increasing the value increases the volume.
Adjust the volume with Power switch / Volume control.
It becomes large in the clockwise direction and decreases in the
counterclockwise direction.
or button to select "
If you want to receive weak carriers, decrease Squelch Level,
0 ~ 3
and if unnecessary carriers exist, increase Squelch Level.
".
or button to select your desired
".
or button to select your desired
55