Toolbar: Quick View On/Off - Toshiba 5000 SERIES Installation And Operation Manual

12.13

Toolbar: QUICK VIEW ON/OFF

At anytime while using the tabs to view system details, the summary of the UPS Input, Output, and DC
Bus can be viewed by pressing the Q. VIEW button (Button will display Q. VIEW ON). The illustration
below highlights the critical features of the Quick View display.
Exit Quick View by pressing the Q. VIEW button again. (Button will display Q. VIEW OFF)
No. Description
1 Displays Vin, Vout, and Vbyp for all three phases
2 Changes voltage display mode: Press repeatedly to display sequentially the voltage as:
Line-to-Line (LL), Line-to-Neutral (LN), and Voltage as a % of rated Voltage (%).
The highlighted icon indicates the voltage display mode.
3 Displays output current for all three phases.
4 Changes current display mode: Press repeatedly to display alternately the current in
Amps (A), or as a % of rated current (%).
The highlighted icon indicates the current display mode.
5 Displays DC Bus voltage, Battery voltage, Battery discharge current, and
DC-AC Efficiency.
2
4
5000 Series NEMA-3R 3-Phase UPS Installation and Operation Manual – 92975-000
TABLE 12.3 – QUICK VIEW DISPLAY
FIGURE 12-9: QUICK VIEW DISPLAY
1
Eff 0 %
5
3
57