Toshiba 5000 SERIES Installation And Operation Manual page 54

5000 Series Industrial Duty 3-Phase In/3-Phase out
Specifications
Frequency Slew Rate
Frequency Synchronous Range
Voltage Regulation
Regulation time
Voltage distortion rate / THD
Overload
Transient Response
System Efficiency
Battery
Battery Nominal Voltage
Battery Minimum Voltage
Battery Float Voltage
DC Ripple voltage
Maximum Re-charge Current
(*Batt. Charge Current + Load
cannot exceed 135% or Rated Input)
Bypass
Configuration
Voltage
Frequency
Bypass Overload Capacity
Bypass Disable
Mechanical
44
20 kVA
Regulation time to +/-1 % <60 msec
Regulation time to +/-3 % <20 msec
Linear load: ≤3%, Non-linear load: ≤5%
±3% Max with a 100% Step Loads,
±2% Max with Loss/Return AC input,
±3% Max when load transfers To/From Bypass
85% - 89% (Depending on configuration)
< 0.5% RMS Ripple @ 100% Load with Battery Connected
4 A default
(20 A max. factory adjustable*)
3PH-4W + Ground OR 3PH-3W + Ground
Nominal (Xfmr.) Input Voltage +10% to -15%, 3P/4W +GND or
3P/3W + GND
Key Transformer Voltage
C 208/120V (Auto-Xfmr)
D 380/220V (Auto-Xfmr)
E 220/127V (Auto-Xfmr)
F 230/132V (Auto-Xfmr)
G 240/138V (Auto-Xfmr)
H 380/220V (Auto-Xfmr)
I 400/230V (Auto-Xfmr)
J 415/240V (Auto-Xfmr)
K 480/277V (Auto-Xfmr)
L 575/332V (Auto-Xfmr)
M 600/346V (Auto-Xfmr)
5000 Series NEMA-3R 3-Phase UPS Installation and Operation Manual – 92975-000
30 kVA
0.5 Hz/sec
50/60 Hz (±5 Hz)
±3%
109% Continuous
110 - 124% for 6 min.,
125 - 149% for 90 sec,
150% for 30 sec
288 Vdc
230.4 Vdc (@1.6V/Cell)
324 Vdc
6 A default
(20 A max. factory adjustable*)
Key Transformer Voltage
O 200V (Iso Xfmr)
P 208V (Iso Xfmr)
Q 220V (Iso Xfmr)
R 230V (Iso Xfmr)
S 240V (Iso Xfmr)
T 380V (Iso Xfmr)
U 400V (Iso Xfmr)
V 415V (Iso Xfmr)
W 480V (Iso Xfmr)
Y 575V (Iso Xfmr)
Z 600V (Iso Xfmr)
50/60 Hz (+/-5 Hz)
125% for 10 min,
150% for 2 min,
1000% for 1 Cycle
No