Ricoh 1075 Scanner Reference page 73

It is possible to use alphabets,
numbers and periods. The sym-
bols ()\,;:" cannot be used.
For more information to enter
the e-mail address, see the Gen-
eral Settings Guide.
C Press [OK].
The name of the destination ap-
pears in the destination display
area on the upper side of the
screen.
Note
❒ Press [U U U U Prev.] or [T T T T Next] to
select the destination.
❒ For changing a destination e-
mail address that has been
entered, press [Change] locat-
ed on the left side of the des-
tination list field. A software
keyboard for entering the
destination e-mail address is
displayed. Enter any e-mail
address, and then press [OK].
❒ Pressing the { { { { Check Modes} } } }
key lets you verify the select-
ed destinations.
D To enter more than one desti-
nation, repeat steps A A A A to C C C C .
Searching for a destination to
select
A Press [
].
The Search/Switch List screen
is displayed.
Procedure for Sending E-mails
B Press [Search].
C Press [Search by User Name].
To search using e-mail address-
es, press [Search by E-mail].
D Enter part of the destination
name.
Note
❒ Enter the first character or
characters of the destination
name.
❒ It is also possible to perform
a combined search using
[Search by User Name] and
[Search by E-mail].
E Press [OK].
A list of destinations is dis-
played according to the user
name search.
F Select a destination.
G Press [Exit].
H Press [OK].
The destination name is dis-
played in the destination field at
the top of the screen.
6
69