Delivering Stored Scan Data By The Network Delivery Scanner; List Displays Of Destinations And Senders - Ricoh 1075 Scanner Reference

5. Delivering Stored Scan Data by
the Network Delivery Scanner
Stored scan data can be sent to a specified destination using the network deliv-
ery scanner function. This chapter explains the various display screens, delivery
procedures, and how to check the delivery result when this function is used.
Note
❒ A delivery server in which ScanRouter V2 Lite/Professional is installed is
necessary to use the network delivery server function. Information about de-
livery destinations and senders must be registered first into the delivery serv-
er. Also, program a connected device in [Set I/O Device] of ScanRouter V2
Administration Utility. For more information, see ScanRouter V2 Adminis-
tration Utility Help.

List Displays of Destinations and Senders

The screen configuration when using the machine as network delivery scanner
is as shown:
1.
[ ] Network Delivery Scanner
Icon
This icon shows that the screen for net-
work delivery scanner is displayed.
2.
Destination Display
The selected destination is shown here. If
several destinations are selected, the des-
tinations are displayed in the order they
were selected by pressing [U U U U Prev.] or
[T T T T Next].
Note
❒ Pressing the { { { { Check Modes} } } } key lets
you verify the selected destinations.
1 2 3 4
7
3.
[Registration No.]
Press this to specify a destination using a
5-digit short ID number.
4.
[Manual Input]
When specifying a destination that is not
listed, press [Manual Input] and enter the
destination with the soft keyboard that is
displayed. For information about send-
ing e-mail from the delivery server, see
p.2 "Manuals for This Machine"
5.
[Attach Sender's Name] [Attach Sub-
ject]
Set the sender and subject of the deliv-
ered document.
5
6
53