Software For Using A Network Delivery Scanner - Ricoh 1075 Scanner Reference

Preparations for Use as a Network Scanner

Software for using a Network Delivery Scanner

To use the machine as a network delivery scanner, it is essential to install Scan-
Router V2 Lite on the delivery server. To check an in-tray or auto-receive the
documents, it is necessary to install DeskTopBinder V2 Lite on the client compu-
ter. Also, the documents can be auto-received by installing only ScanRouter V2
Link on the client computer.
2
Use Auto Run for installation.
Preparation
Before installing, check the operating environment for each software.⇒ p.36
"Software Supplied on CD-ROM"
A A A A
Verify that Windows is running. Insert the supplied CD-ROM labeled
"Scanner Driver & Document Management Utilities" into the CD-ROM
drive of the computer.
The choose setup language screen is displayed.
B B B B
Select a setup language, and then click [OK].
The CD-ROM Launcher screen is displayed.
C C C C
Click the key of the software to be installed.
• The ScanRouter V2 Lite installer starts by clicking [ScanRouter V2 Lite].
• The DeskTopBinder V2 Lite installer starts by clicking [DeskTopBinder V2
Lite].
The change the language screen is displayed.
Reference
For information about the subsequent installation procedure, see the Setup
Guide that can be displayed from the Setup screen of the respective soft-
ware.
D D D D
Select a language used by this component, and then click [OK].
The software setup screen is displayed.
34