Setting Originals; Setting Originals On The Exposure Glass - Savin 25105 Copy Reference Manual

Copying

Setting Originals

Limitation
Set originals after correction fluid and ink has completely dried. Not taking
this precaution could mark the exposure glass and cause marks to be copied.
Note
2
Normally originals should be aligned to the rear left corner. However, some
copy functions may produce different results depending on the direction of
the originals. For details, see the explanations of each function in this manual.
Reference
See P.15 "Originals".

Setting Originals on the Exposure Glass

A
Lift the document feeder.
Note
Be sure to open the document feeder by more than 20 otherwise the orig-
inal size might not be detected correctly.
26