Transition Of Displays - Panasonic AK-UCU600P Operating Instructions Manual

Transition of displays

When trouble is detected, warning information is automatically displayed on the picture monitor.
Even if status information or operation information is already displayed on the picture monitor when trouble is detected, priority is given to
the display of the warning information.
The descending sequence of priority for the displays on the picture monitor is as follows: warning displays → auto displays → status
displays → ROP menu displays → CCU menu displays → operation displays → no display.
When the warning information with the highest priority disappears, the warning information with the next highest priority appears.
Priority Screen
High Warning displays
↑
↓
Low
Auto displays
Status displays
CCU menu displays
● When the camera menu is
displayed from the ROP while
a menu of the CCU (this unit)
is displayed, the menu of the
CCU (this unit) disappears.
Operation displays
No display
Yes
Warnings are automatically displayed when
trouble is detected.
● Self-recovery
● The warning displays are cleared
● Press the [CHARA] button of the ROP
No display→(WARNING)→ IRIS →Status
displays→ Status1 → Status2 → Status3
→ Status4 → Status5 → Status6 →
Status7 → IRIS ・ ・ ・
● Hold down the [CHARA] button of the
ROP
The warning displays are cleared
Automatically displayed
● Perform display operations using the
[CHARA] button of the ROP.
● Press the [CHARA] button of the ROP
No display→(WARNING)→ IRIS →Status
displays→ Status1 → Status2 → Status3
→ Status4 → Status5 → Status6 →
Status7 → IRIS ・ ・ ・
● Hold down the [CHARA] button of the
ROP
The status displays end.
Display by pressing the menu button on the
unit.
● Operations using the [SELECT] dial on
the unit
Automatically displayed
–
- 28 -
ROP connected
No
Warnings are automatically displayed when
trouble is detected.
● Self-recovery
The warning displays are cleared
● Press the [USER1] button of this unit
(This is enabled when [CHARA] is
assigned to the button.)
• When the transition source screen is
displayed:
The display switches to the transition
source screen.
• When the transition source screen is
not displayed:
The warning displays are cleared
Automatically displayed
–
Display by pressing the menu button on the
unit.
● Operations using the [SELECT] dial on
the unit
Automatically displayed
–
Picture monitor (PM)