Panasonic AK-UCU600P Operating Instructions Manual page 133

RS-422
REAR ROP 1 line, 16 V DC output (only one of this and FRONT ROP can be selected at one time via the menu or the [ROP
FRONT/REAR] selection switch on the front panel)
RS-422
MSU
1 line, GPI for control
LAN connection with camera side via an optical cable*
LAN TRUNK
1 line, 100BASE-TX, 1000BASE-T
Personal computer connection for distribution via the Web*
LAN
1 line, 10BASE-T, 100BASE-TX (use a crossover cable when connecting directly with a personal computer)
*1: The BB (black burst) signal and tri-level sync signal of the reference input are recognized automatically.
*2: Depending on the setting, only one of them can be selected at one time.
*3: IP video is cannot be transmitted when [CCU MODE] is set to [2160/23.98p], [2160/23.98psf], [1080/23.98p], or [1080/23.98psF].
The symbols on this product (including the accessories) represent the following:
AC
Power on
Power off
NOTE
● For details on the maximum lengths of connection cables, consult your dealer.
Inrush current, measured according to European standard EN55103-1, on initial switch-on: 3 A, after a supply interruption of 5 s: 80 A
3
3
- 133 -
Specifications