Panasonic AK-UCU600P Operating Instructions Manual page 79

AUX
This is the selection screen for the AUX menu.
Item Setting value
FUNCTION WFM_TYPE-A+SD_ASPECT
WFM_TYPE-B+SD_ASPECT
AUDIO GAIN+SD_ASPECT
Selecting connected waveform monitors
Configure the type of waveform monitor (WFM) to connect to the [AUX] connector as follows.
Setting value
TYPE-A
TYPE-B
● There are two types of waveform monitor (WFM) you can connect.
● You can recall presets for the waveform monitor in the [MONITOR] menu.
Waveform monitor presets must be configured on the waveform monitor beforehand.
Depending on the model, connection of the waveform monitor to the unit may require cable connections other than those described.
Relationship between the MONITOR menu and waveform monitor preset numbers
By using the preset function of the waveform monitor, you can load the waveform monitor's waveform display settings.
MONITOR menu setting
R
B
G
R+B+G
R+B
R+G
B+G
SEQ
ENC
● For details on the controls that correspond to the preset numbers set on the waveform monitor, consult your dealer.
A UX
F UN CT ION
WFM_TYPE -A+ SD_A SPE CT
Switch the function of the [AUX] connector.
WFM_TYPE-A+SD_ASPECT / WFM_TYPE-B+SD_ASPECT
Waveform monitor control output and down-conversion input
AUDIO GAIN+SD_ASPECT
Camera's MIC gain control output and down-conversion input
"Down-conversion mode settings" (see page 124)
"AUDIO GAIN settings" (see page 124)
Coded Mode
Direct Mode
Preset setting numbers of waveform monitor
Preset1
Preset2
Preset3
Preset4
Preset5
Preset6
- 79 -
___ indicates factory default settings.
Setting details
Control mode
CCU menu