Picture Monitor (Pm) Displays; Switching The Display; Transition Of Displays - Panasonic AKHCU200 Operating Instructions Manual

Picture monitor (PM) displays

Switching the display

Display the camera statuses, warnings, and other information on the
picture monitor using the operation panel of the ROP .
Press the CHARA button of the ROP to display the desired information .
The camera statuses, warnings, and other information are cleared when
the CHARA button of the ROP is held down .

Transition of displays

When trouble is detected, warning information is automatically displayed on the picture monitor .
Even if status information or operation information is already displayed on the picture monitor when trouble is detected, priority is given to the display of
the warning information .
The descending sequence of priority for the displays on the picture monitor is as follows: WARNING displays → AUTO displays → STATUS displays →
REMOTE OPERATION menu displays → CCU menu displays → OPERATION displays → no display .
When the warning information with the highest priority disappears, the warning information with the next highest priority appears .
Sequence of What is displayed on the
priority screen
WARNING displays
Higher
AUTO displays
STATUS displays
REMOTE OPERATION menu
displays
z When a menu of the CCU
z
(this unit) is displayed while
the REMOTE OPERATION
menu is displayed, the
REMOTE OPERATION menu
disappears .
CCU menu displays
z When the REMOTE
z
OPERATION menu is
displayed while a menu of the
CCU (this unit) is displayed,
the menu of the CCU (this
unit) disappears .
OPERATION displays
Lower
No display
Yes
Warnings are automatically displayed when
trouble is detected .
z Self-recovery
z
The warning displays are cleared .
z Press the CHARA button of the ROP
z
The display switches to the status screen (IRIS
or status display) .
z Hold down the CHARA button of the ROP
z
The warning displays are cleared .
Automatically displayed
Perform display operations using the CHARA
button of the ROP .
z Press the CHARA button of the ROP
z
No display → (WARNING) → IRIS → status
displays → Status1 → Status2 → Status3 →
Status4 → Status1 . . .
z Hold down the CHARA button of the ROP
z
The status displays end .
Display by pressing the CHARA button of the
ROP .
z Operations using the SELECT dial of the ROP
z
Display by pressing the MENU button on the unit .
z Operations using the SELECT dial on the unit
z
Automatically displayed
——
CHARA button
ROP connected
Warnings are automatically displayed when
trouble is detected .
z Self-recovery
z
The warning displays are cleared .
z Press the SELECT dial on the unit
z
When the transition source screen is displayed:
The display switches to the transition source
screen .
When the transition source screen is not
displayed:
The warning displays are cleared .
Automatically displayed
Display by pressing the MENU button on the unit .
z Operations using the SELECT dial on the unit
z
Automatically displayed
ROP: AK-HRP200
No
——
3