System - Panasonic AK-UCU600P Operating Instructions Manual

SYSTEM

This is the selection screen for the SYSTEM menu.
Setting
Item
value
INITIALIZE -
FACTORY -
INITIALIZE
CCU CUSTOM DATA -------
LOAD
CCU CUSTOM DATA CURRENT
SAVE FACTORY
CANCEL
ROP CONNECT
FRONT
SERIAL
REAR
-------
ROP CONNECT CONNECT
NETWORK -------
SYSTEM
INITIALIZE
FACTORY INITIALIZE
CCU CUSTOM DATA LOAD
CCU CUSTOM DATA SAVE
ROP CONNECT SERIAL
NETWORK
Return the menu items to the factory default values.
"Initialize the Unit Settings (INITIALIZE)" (see page 87)
Return the unit's settings to the factory default values.
When you place the cursor on [FACTORY INITIALIZE] and press the [SELECT] dial, [FACTORY
INITIALIZE? NO/YES] appears. Select [YES] to start initialization.
● Controls from the camera, ROP, or MSU cannot be performed during initialization.
Call the CCU management data stored in the CCU.
Store the setting data managed by the CCU inside the CCU.
The items that are stored are the same as the items set with [FACTORY INITIALIZE].
CURRENT
Saves the values currently set for the CCU.
FACTORY
Saves the values set with [FACTORY INITIALIZE].
Displays the status of ROP connection (serial connection) to the unit.
FRONT
Connection is to the front panel [ROP] connector.
REAR
Connection is to the rear panel [ROP] connector.
-------
No serial connection.
Displays the status of ROP connection (IP connection) to the unit.
CONNECT
Connection is by IP connection.
-------
No IP connection.
- 86 -
CURRENT
FRONT
CONNECT
___ indicates factory default settings.
Setting details
CCU menu