Status Displays - Panasonic AK-UCU600P Operating Instructions Manual

Status displays

From the IRIS display screen, press the [CHARA] button of the ROP to display the "status display screen".
However, when the "IRIS LEVEL" setting is "OFF", the screen will be displayed first if the [CHARA] button of the ROP is pressed when the
information is not displayed on the picture monitor.
When the "status display screen" appears, pressing the [CHARA] button of the ROP again displays the status screen.
Pressing the [CHARA] button repeatedly switches display through the status screens in the sequence 1/7 → 2/7 → 3/7 → 4/7 → 5/7 → 6/7
→ 7/7 → 1/7 ....
Status display screen
A. Camera number
B. System format
C. Scene file number
Not displayed when SCENE FILE is set to OFF.
D. Shutter value
E. CCU format information
F. COLORIMETRY (Y/C conversion coefficient) information
G. Extender information
H. Lens information
I. Zoom position
J. Focus position
K. Optical signal reception status (camera and CCU)
L. ND/CC filter value
M. Color temperature
N. IRIS F value
O. TALLY INFO
● Set each item to be displayed on the [PM VIEW SETTING] screen that can be accessed by selecting [MAINTENANCE] on the
CCU menu.
● The camera format indicates the format of the signal output from the camera.
● Pressing the [CHARA] button of the ROP from the status display screen displays the "status screen".
● TALLY INFO (L)
• Display the R tally in two segments of the upper row and the R, G, or YL tally in two segments of the lower row.
• When all R, G, and YL tally signals are ON, the upper row is red, and the left and right segments of the lower row are
green and yellow, respectively.
• When the R and G tally signals are ON, the upper row is red and the lower row is green.
A B
O
C1 1080/59.94p-240psf
E
UHD_HDR
F
BT.2020
EX DZx2
G
EX x2
H
F.DROP
ND: *****
O
CC: ***** 15000K
L M
- 31 -
C
O
D
SCENE1 1500
I
Z00
J
F00
OPT_CAM:
K
OPT_CCU:
O
CLOSE
N
Picture monitor (PM)