Reference - Panasonic AK-UCU600P Operating Instructions Manual

Reference

Connector pin assignment table
Front panel
[INTERCOM] connector (page 21: 5)
HA16PRH-5S (Hirose Electric Co., Ltd.)
Pin No. Function
1 SHIELD Carbon MIC: -1 dB
Dynamic MIC: -5 dB
2 TALK
● Select [DYN] , [ECM], or [CBN] in [MIC TYPE] that can be accessed by selecting [CCU INTERCOM
3 SHIELD
4 RECEIVE
5 NC
Rear panel
[AUX] connector (page 26: 2)
JAY-15S-1A3F(LF)(SN) (J.S.T. Mfg. Co., Ltd.)
Pin No. Function
1 TALLY YL OUT Open collector output
2 P6 See remarks
3 P5
4 P4
5 P3
6 P2
7 P1
8 GND Ground
9 MODE2 Photo-coupler input
10 MODE1 Photo-coupler input
11 GND Ground
12 ALARM Open collector output
13 TALLY R OUT Open collector output
14 TALLY G OUT Open collector output
15 GND Ground
TALK] in the [AUDIO] menu.
Specifications
"Example of tally and alarm output connections" (see page 125)
When [AUX] > [FUNCTION] is set to [WFM_TYPE-A+SD_ASPECT] or [WFM_
TYPE-B+SD_ASPECT] in the [MAINTENANCE] menu:
● Waveform monitor preset setting bit output
● Open collector output
When [AUX] > [FUNCTION] is set to [AUDIO GAIN+SD_ASPECT] in the
[MAINTENANCE] menu:
● Camera microphone gain setting bit input
● Photo-coupler input
"Down-conversion mode settings" (see page 124)
"Example of mode input connections" (see page 125)
"Example of tally and alarm output connections" (see page 125)
"Example of tally and alarm output connections" (see page 125)
"Example of tally and alarm output connections" (see page 125)
- 123 -
Remarks
Remarks
Reference