Displaying The Web Screen - Panasonic AK-UCU600P Operating Instructions Manual

Displaying the web screen

With a personal computer connected to the unit, it is possible to view the camera's IP videos or select various settings from the web browser.
Use a LAN crossover cable when connecting a personal computer directly to the unit's LAN connector for IP control. Use a LAN straight
cable when connecting through a switching hub or other device.
Notice regarding the Web screen
IP address and subnet mask
Select an IP address for the personal computer within the private address range while ensuring that it is different from the address of the
unit. Set the subnet mask to the same address as the unit.
If you need to change the IP address and subnet mask, be sure to ask your dealer to make these changes for you.
● Unit's IP address and subnet mask (factory settings)
IP address
Subnet mask
Range of private addresses
Personal computer environment required to display the Web screen
For details on the personal computer environment required to display the Web screen, refer to following page.
"Personal computer requirements" (see page 12)
● Some functions on the web setting screen can be used only from a personal computer which is running Windows. (They cannot be
used from a personal computer which is running OS X (Mac).)
Functions which can be used by Windows only are indicated using [Windows].
● The "Network Camera View 4S" plug-in viewer software must have already been installed in order to display the unit's IP videos
using a personal computer which is running Windows. (This is not required for a personal computer which is running OS X (Mac).)
"Installing the plug-in viewer software" (see page 92)
Displaying the web screen using a personal computer
The procedure is explained here using Windows (Internet Explorer) screens, but it is the same when using the Mac (Safari) screens. (There
may be differences in some parts of the screen displays.)
1. Start the web browser of the personal computer.
Use one of the web browsers below depending on the operating system installed in the personal computer.
Installed OS
Windows Internet Explorer
OS X (Mac) Safari
2. Enter the IP address you configured on the Easy IP Setup Software in the address bar of the web
browser.
• Example of input
http://registered URL
http://192.168.0.20
• If the HTTP port number has been changed from 80, enter [http://<camera IP address>:<port number>] in the address bar.
Ex.: When the port number is set to 8080 :
http://192.168.0.20:8080
• When this unit is in a local network, set a proxy server from the web browser ([Tools] - [Internet Options] in the menu bar)
to ensure that a proxy server is not used for a local address.
192.168.0.20
255.255.255.0
192.168.0.0 to 192.168.0.255
Web browser
- 93 -
Web Screen