To Adjust The Sensitivity Of Smart Cruise Control - Hyundai Santa Fe Owner's Manual

Driving your vehicle
•
Use only a soft cloth to wash
the vehicle. Do not spray pres-
surized water directly on the
sensor or sensor cover.
•
Be careful not to apply unnec-
essary force on the radar sen-
sor or sensor cover. If the sen-
sor is forcibly moved out of
proper alignment, the Smart
Cruise Control system may
not operate correctly. In this
case, a warning message may
not be displayed. Have the
vehicle inspected
HYUNDAI authorised repairer.
•
If the front bumper becomes
damaged in the area around
the radar sensor, the Smart
Cruise Control system may
not operate properly. We rec-
ommend that you have the
vehicle inspected
HYUNDAI authorised repairer.
•
Use only HYUNDAI parts to
repair or replace a damaged
sensor or sensor cover. Do
not apply paint to the sensor
cover.
5-184
Check SCC (Smart Cruise Control)
system
by a
The message will appear when the
vehicle to vehicle distance control
system is not functioning normally.
We recommend that you take your
vehicle to by a HYUNDAI authorised
repairer and have the system
checked.
by a
To adjust the sensitivity of
Smart Cruise Control
OIK058109R
The sensitivity of vehicle speed
when following the front vehicle to
maintain the set distance can be
adjusted. Go to the 'User Settings →
Driver assistance → SCC response
→ Fast/Normal/Slow' on the LCD
display. You may select one of the
three stages you prefer.
OIK057097L