Hyundai Santa Fe Owner's Manual page 205

Convenient features of your vehicle
When the High Beam Assist (HBA) is
operating, the high beam switches to
low beam in the following conditions.
- When the headlamp of an on-com-
ing vehicle is detected.
- When the tail lamp of a vehicle in
front is detected.
- When headlamp/tail lamp of bicy-
cle/motorcycle is detected.
- When the surroundings are bright
enough high beams are not needed.
- When streetlights or other lights
are detected.
- When the light switch is not in the
AUTO position.
- When the High Beam Assist (HBA)
is off.
- When vehicle speed is below 22mph
(35 km/h).
3-114
Warning light and message
When the High Beam Assist (HBA) is
not working properly, the warning
message will come on for a few sec-
ond. After the message disappears,
the master warning light (
minate.
We recommend that you take your
vehicle to a HYUNDAI authorised
repairer and have the system
checked.
The system may not operate
normally in the following condi-
tions.
When the light from on-com-
ing or vehicle in front is dim
•
When the in light from the on-
coming or vehicle in front in is
not detected because of lamp
damage, hidden from sight,
etc.
OOS047127R
•
When the lamp of the on-com-
ing or vehicle in front is cov-
ered with dust, snow or water.
•
When the vehicle in front's
headlamps are off but the fog
) will illu-
lamps on and etc.
CAUTION