Hyundai Santa Fe Owner's Manual page 433

Driving your vehicle
• The options for the initial Blind-
Spot Collision Warning includes
the following:
- Normal:
When this condition is selected,
the initial Blind-Spot Collision
Warning is activated normally. If
this setting feels too sensitive
change the option to 'later'.
The warning activation time may
feel late if the side/rear vehicle
abruptly accelerates.
- Later:
Select this warning activation
time when the traffic is light and
you are driving in a low speed.
However, if you change the warn-
ing activation time, the warning
activation time of vehicle's other
system may also change. Check
the warning activation time before
changing it.
5-104
• The driver can select the warning
volume of Blind-Spot Collision
Warning in the User Settings in the
LCD display by selecting "User
Settings → Driver assistance →
Warning volume → High/Medium/
Low" the warning volume of vehi-
cle's other system may also
change.
For more information refer to
"LCD Display" in chapter 3.
Operating Conditions
The system enters the ready status,
when following conditions are satis-
fied :
The vehicle speed is above about 20
mph (30 km/h).