Driver Position Memory System; Driver Position Memory System Reset - Hyundai Santa Fe Owner's Manual

You can activate or deactivate the
Easy Access Function from the User
Settings mode on the LCD display.
- Seat easy access: Convenience →
Seat easy access
Normal/Extended.
- Steering easy access: Convenience
→ Steering easy access → On/Off.
For more details, refer to "LCD
Display" in this chapter.
CAUTION
Driver should be cautious when
using this function to assure no
injury to passenger or child on
the back seat. In case of emer-
gency the driver has to stop
movement of front seat (when
easy access feature is activat-
ed) by pressing SET button or
any of the driver seat control
switches.

Driver position memory system

reset
If the Driver position memory system
does not work properly, initialise the
→
Off/
system as follows.
How to initialise:
1. Stop the vehicle and open the dri-
ver's door with the Engine Start/
Stop button in the ON position and
the vehicle shifted to P (Park).
2. Pull the driver's seat forward as far
as possible and have the seatback
upright as much as possible using
the driver's seat forward/backward
adjustment and seatback angle
(recline) switches.
3. Push the SET button and seat for-
ward movement switch for 2 sec-
onds simultaneously.
Initialisation in the process:
1. Initialisation begins as the alarm
sounds.
2. The seat and seatback will auto-
matically move backwards. The
alarm sound will continue whilst
the system is in operation.
3. Initialisation will be complete after
the seat and seatback move to the
centre with an alarm sound. If,
however, cases as follows occur,
the initialisation process will come
to a stop and the alarm sound will
stop as well.
- When pushing driving position
memory system button
- When pushing driver's
height adjustment switch
- When shifting from P (Park) to
other positions
- When driving speed exceeds
2mph (3 km/h)
- When the driver's door is closed
3
seat
3-25