Hyundai Santa Fe Owner's Manual page 454

• The driver can select the warning
volume of Blind-Spot Collision
Warning in the User Settings in the
LCD display by selecting "User
Settings → Driver assistance →
Warning volume → High/Medium/
Low" the warning volume of vehi-
cle's other system may also
change.
For more information refer to
"LCD Display" in chapter 3.
Operating Conditions
The system enters the ready status,
when the 'Active assist' or 'Warning
only' is selected and following condi-
tions are satisfied:
• Select the "Active assist"
1) The Blind-Spot
Avoidance Assist System will acti-
vate when
- Vehicle speed is between 37 mph
and 112 mph (60 km/h ~ 180
km/h).
- The system detects both of the
lane lines.
- An approaching vehicle is detect-
ed next to/behind your vehicle.
2) The Blind-Spot Collision Warning
System will activate when
The vehicle speed is above about
20 mph (30 km/h).
• Select the "Warning only"
1) The Blind-Spot Collision Warning
System will activate when
- The vehicle speed is above about
20 mph (30 km/h)
❈ The
Blind-Spot
Avoidance Assist System is not
Collision-
activated.
Collision-
5
5-125