Hyundai Santa Fe Owner's Manual page 437

Hide thumbs Also See for Santa Fe:
Table of Contents

Advertisement

Driving your vehicle
If any of these conditions occur, the
light on the BCW switch and the sys-
tem will turn off automatically.
Turn off the BCW and RCCW system
(if equipped) when a trailer or carrier
is installed.
- Press the BCW button (the indica-
tor on the button extinguish)
- Deactivate the RCCW system by
deselecting
"User Settings → Driver assistance
→ Blind-spot safety → RCCW
(Rear
Cross-Traffic
Warning)" (if equipped)
If you use BCW system, remove a
trailer or carrier.
When the BCW cancelled warning
message is displayed in the cluster,
check to make sure that the rear
bumper is free from any dirt or snow
in the areas where the sensor is
located. Remove any dirt, snow, or
foreign material that could interfere
with the radar sensors.
5-108
After any dirt or debris is removed,
the BCW should operate normally
after about 10 minutes of driving the
vehicle.
If the system still does not operate
normally have your vehicle inspected
by a HYUNDAI authorised repairer.
Collision
Check BCW (Blind-spot Collision
Warning) system
If there is a problem with the BCW
system, a warning message will
appear and the light on the switch
will turn off. The system will turn off
automatically. We recommend that
you have your vehicle inspected by a
HYUNDAI authorised repairer.
OIK058094R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents