Hyundai Santa Fe Owner's Manual page 431

Driving your vehicle
BLIND-SPOT COLLISION WARNING (BCW) (IF EQUIPPED)
System description
Blind-Spot Collision Warning
(BCW)
The Blind-Spot Collision Warning
System (BCW) uses radar sensors in
the rear bumper to monitor and warn
the driver of an approaching vehicle
in the driver's blind spot area.
1) Blind-Spot Area
The blind spot detection range varies
relative to vehicle speed.
Note that if your vehicle is travelling
much faster than the vehicles around
you, the warning will not occur.
5-102
2) Closing at high speed
The Lane Change Assist feature will
alert you when a vehicle is approach-
ing in an adjacent lane at a high rate
of speed. If the driver activates the
turn signal when the system detects
an oncoming vehicle, the system
sounds an audible alert.
OTM058120R
•
Always be aware of road con-
ditions whilst driving and be
alert for unexpected situa-
tions even though the Blind-
Spot
System is operating.
•
The Blind-Spot
Warning System (BCW) is
supplemental
assist you. Do not entirely rely
on the systems. Always pay
OTM058121R
attention, whilst driving, for
your safety.
•
The Blind-Spot
Warning System (BCW) is not
substitutes for proper and
safe driving. Always drive
safely and use caution when
changing lanes or backing up
the vehicle.
The Blind-Spot
Warning System (BCW) may
not detect every object along-
side the vehicle.
WARNING
Collision Warning
Collision
systems to
Collision
Collision