Factory Settings - NETGEAR BR500 User Manual

Factory settings

You can reset the router to the factory default settings that are shown in the following
table.
For more information about resetting the router to its factory settings, see Return the
router to its factory default settings on page 107.
The following table shows the factory default settings.
Table 2. Router factory default settings
Feature
Router login
User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet connection
WAN MAC address
WAN MTU size
Port speed
Local network (LAN)
LAN IP address
Subnet mask
DHCP server
DHCP range
DHCP starting IP address
DHCP ending IP address
VLANs
DMZ
Time zone
Supplemental information
Insight Instant VPN Router BR500
Default Settings
www.routerlogin.net (or www.routerlogin.com or 192.168.1.1)
admin
password
Use default hardware address
Determined by the protocol that is used for the Internet connection (see Change
the MTU size on page 41)
AutoSensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254 for the default LAN subnet (LAN1)
192.168.1.2 for the default LAN subnet (LAN1)
192.168.1.254 for the default LAN subnet (LAN1)
VLAN 1 with all LAN ports as untagged members
VLAN 2 with the WAN port as an untagged member
Disabled
North America: Pacific Standard Time
Europe: GMT
Other continents: Varies by region
160 User Manual