Manage The Router Information Protocol Settings - NETGEAR BR500 User Manual

To disable the DHCP server for a LAN subnet:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn't change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select BASIC > Setup > LAN Setup.
The LAN Setup page displays for the default LAN subnet (LAN1).
5. If you added another LAN subnet (see Add a LAN subnet on page 76) and want to
change the DHCP pool for that LAN subnet, click the tab for that LAN subnet.
6. Clear the Use Router as DHCP Server check box.
7. Click the Apply button.
Your settings are saved.

Manage the Router Information Protocol settings

Router Information Protocol (RIP) lets the router exchange routing information with other
routers. By default, RIP is enabled for the default LAN subnet (LAN1) in both directions
(in and out) without a particular RIP version. You cannot configure RIP for any other LAN
subnets.
To manage the RIP settings:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
Manage the LAN and VLAN
Settings
Insight Instant VPN Router BR500
75 User Manual