Remove A Port Triggering Rule - NETGEAR BR500 User Manual

The port triggering settings display.
6. In the Port Triggering Portmap Table, select the radio button for the service or
application name.
7. Click the Edit Service button.
The Edit Triggering Service slide-out panel opens.
8. Change the settings.
For information about the settings, see Add a port triggering rule on page 142.
9. Click the Apply button.
Your settings are saved. The changed rule displays in the Port Triggering Portmap
Table on the Port Forwarding / Port Triggering page.

Remove a port triggering rule

You can remove a port triggering rule that you no longer need.
To remove a port triggering rule:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn't change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select ADVANCED > Firewall > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The port triggering settings display.
6. In the Port Triggering Portmap Table, select the radio button for the service or
application name.
7. Click the Delete Service button.
Manage Port Forwarding and
Port Triggering Traffic Rules
Insight Instant VPN Router BR500
144 User Manual