Allow Or Block Device Access To Your Network; Enable And Manage Network Access Control - NETGEAR BR500 User Manual

To change the default SIP ALG setting:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn't change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select ADVANCED > Firewall > Basic Setup.
The Basic Setup page displays.
5. To disable the SIP ALG, select the Disable SIP ALG check box.
The SIP ALG is enabled by default.
6. Click the Apply button.
Your settings are saved.

Allow or block device access to your network

You can use device access control to block or allow access to your network. You define
access by selecting or specifying the MAC addresses of the wired devices that either
can access your entire network or are blocked from accessing your entire network.

Enable and manage network access control

When you enable access control, you must select whether new devices are allowed to
access the network or are blocked from accessing the network. By default, currently
connected devices are allowed to access the network, but you can also block these
devices from accessing the network.
To set up network access control:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter https://www.routerlogin.net.
Manage the Firewall and
Security
Insight Instant VPN Router BR500
51 User Manual