Manually Set Up The Router Internet Connection; Specify A Dynamic Or Fixed Ip Address Internet Connection Without A Login - NETGEAR BR500 User Manual

Manually set up the router Internet
connection
You can view or change the router's Internet connection settings.
Specify a dynamic or fixed IP address Internet connection
without a login
To specify or view the settings for an ISP or LAN Internet connection that uses a
dynamic or fixed IP address and that does not require a login:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn't change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select BASIC > Setup > WAN Setup.
The WAN Setup page displays.
5. Select the No radio button.
This is the default setting.
6. If your Internet connection requires an account name (or host name), do the following:
a. Click the Edit button.
The Edit Device Name slide-out panel opens.
b. In the Device Name field, enter the account name.
The account name is the same as the device name, which, by default, is BR500.
c. Click the Apply button.
Your settings are saved.
Specify Your Internet Settings
Manually
Insight Instant VPN Router BR500
22 User Manual