NETGEAR BR500 User Manual page 93

To enable the IPTV bridge for a VLAN tag group:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn't change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select ADVANCED > IPTV.
The IPTV page displays.
5. Select the Enable VLAN/Bridge group check box.
The page expands.
6. Select the By VLAN tag group radio button.
The page adjusts and the default VLAN tag group displays.
7. To add a custom VLAN tag group, do the following:
a. Click the Add button.
The Add VLAN Rule slide-out panel opens.
b. Specify the settings in the following fields:
• Name. Enter a name for the VLAN tag group.
The name is for identification purposes.
• VLAN ID. Enter a value from 1 to 4094.
• Priority. Enter a value from 0 to 7.
c. Select the check box for the LAN port to which the device is connected.
You must select at least one LAN port. You can select more than one LAN port.
8. Click the Apply button.
Your settings are saved. If you added a VLAN tag group, the group is added to the
table on the Enable VLAN/Bridge group page.
Manage the LAN and VLAN
Settings
Insight Instant VPN Router BR500
93 User Manual