Erase The Settings - NETGEAR BR500 User Manual

Erase the settings

Caution:
This process erases all settings that you configured in the router.
To erase the settings:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn't change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select ADVANCED > Backup Settings.
The Backup Settings page displays.
5. Click the Erase button.
A warning page displays.
6. Click the Apply button.
The configuration is reset to factory default settings. When the reset is complete,
the router reboots. This process takes about two minutes.
Warning:
To avoid the risk of corrupting the firmware, do not interrupt the reset.
For example, do not close the browser, click a link, or load a new page. Do not turn
off the router. Wait until the router finishes restarting and the Power LED turns solid
green.
Maintain the Router
Insight Instant VPN Router BR500
108 User Manual