Change A Port Triggering Rule - NETGEAR BR500 User Manual

Single address. Restricts the service to a particular computer. Enter the IP
-
address in the Service IP fields, which become available with this selection
from the menu.
• Service Type. Select the protocol (TCP or UDP) that is associated with the service
or application.
• Triggering Port. Enter the number of the outbound traffic port that must open
the inbound ports.
• Service Type. Select the protocol (TCP or UDP) that is associated with the inbound
connection. If you are unsure, select TCP/UDP.
• Starting Port. Enter the start port number for the inbound connection.
• Ending Port. Enter the end port number for the inbound connection.
8. Click the Apply button.
Your settings are saved and the rule is added to the Port Triggering Portmap Table
on the Port Forwarding / Port Triggering page.

Change a port triggering rule

You can change an existing port triggering rule.
To change a port triggering rule:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn't change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select ADVANCED > Firewall > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
Manage Port Forwarding and
Port Triggering Traffic Rules
Insight Instant VPN Router BR500
143 User Manual