Factory Settings - NETGEAR DOCSIS C6230 User Manual

Factory Settings

You can return the cable modem to its factory settings. Use the end of a paper clip or
a similar object to press and hold the Reset button on the back of the cable modem
for at least seven seconds. The cable modem resets, and returns to the factory
configuration settings shown in the following table.
Table 4. Factory default settings
Feature
Cable User login URL
modem
router User name (case-sensitive)
login
Login password (case-sensitive)
Local LAN IP
network
(LAN) Subnet mask
DHCP server
DHCP range
DMZ
Time zone
SNMP
Cable Inbound (communications coming in
modem from the Internet)
firewall
Outbound (communications going out
to the Internet)
Supplemental Information
C6230 WiFi Cable Modem Router
Default behavior
www.routerlogin.net or 192.168.0.1
admin
The first time that you log in to the modem
router, you are prompted to set the admin
password
192.168.0.1
255.255.255.0
Enabled
192.168.0.2 to 192.168.0.254
Disabled
ISP/MSO ToD (time of day) configuration
Enabled
Disabled
Enabled (all)
105 User Manual