Remove A Lan Subnet - NETGEAR BR500 User Manual

Remove a LAN subnet

If you no longer need a LAN subnet, you can remove it. Before you remove it, make
sure that no clients are connected to the LAN subnet. You cannot remove the default
LAN subnet (LAN1).
Note: If you added two LAN subnets, LAN2 and LAN3, and you remove LAN2, the old
LAN3 becomes the new LAN 2. That is, the name changes from LAN3 to LAN2.
To remove a LAN subnet:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn't change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select BASIC > Setup > LAN Setup.
The LAN Setup page displays for the default LAN subnet (LAN1).
5. Click the tab for that the LAN subnet that you want to remove.
6. Scroll to the bottom and click the Delete button.
A warning pop-up window opens.
7. Click the OK button.
The LAN subnet is removed.
Manage the LAN and VLAN
Settings
Insight Instant VPN Router BR500
78 User Manual