Configuring Call Home Data Privacy - Cisco ASR 9000 Series User Configuration Manual

Configuring Call Home
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 call-home reporting { anonymous | contact-email email-address } [
http-proxy { address } port port-number ]
Example:
RP/0/RSP0/CPU0:router (config) # call-home reporting
contact-email email@company.com

Configuring Call Home Data Privacy

SUMMARY STEPS
1. configure
2. call-home
3. data-privacy { level { normal | high } | hostname }
DETAILED STEPS
Command or Action
Step 1 configure
Step 2
call-home
Example:
RP/0/RSP0/CPU0:router(config) #
call-home
Step 3 data-privacy { level { normal | high } |
hostname }
Example:
RP/0/RSP0/CPU0:router(config-call-home)
# data-privacy level high
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
Purpose
Enters the call home configuration submode.
Scrubs data from call-home message to protect the privacy of the user.
The default data-privacy level is normal.
• normal - scrubs all normal level commands , such as , password/
username/ ip/ destination.
• high - scrubs all normal level commands plus the IP domain name
and IP address commands.
• hostname - scrubbing the hostname from call-home messages
may cause Smart Call Home processing failure.
Enabling the data-privacy command can affect CPU utilization
Note
when scrubbing a large amount of data.
Configuring Call Home Data Privacy
Purpose
Enables all call home basic configurations
using a single command.
321