Craft Panel Interface
Command or Action
Example:
RP/0/RSP0/CPU0:router# show line
Step 2
show terminal
Example:
RP/0/RSP0/CPU0:router# show terminal
Step 3
show users
Example:
RP/0/RSP0/CPU0:router# show users
Craft Panel Interface
The Craft Panel is an easily-accessible and user-friendly interface which assists the field operator in
troubleshooting the router. It consists of a LCD display and three LEDs. The LEDs indicate minor, major and
critical alarms.
For more details of the Craft Panel Interface, refer the Hardware and System set-up guides.
Configuration Examples for Implementing Physical and Virtual
Terminals
Modifying the Console Template: Example
This configuration example shows how to modify the terminal attribute settings for the console line template:
line console
exec-timeout 0 0
escape-character 0x5a
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
350
Purpose
• Specifying the show line aux location node-id EXEC command
displays the terminal parameters of the auxiliary line.
• Specifying the show line console location node-id EXEC command
displays the terminal parameters of the console.
◦ For the location node-id keyword and argument, enter the location
of the Route Processor (RP) on which the respective auxiliary or
console port resides.
◦ The node-id argument is expressed in the format of
rack/slot/module .
• Specifying the show line vty number EXEC command displays the
terminal parameters for the specified vty.
(Optional)
Displays the terminal attribute settings for the current terminal line.
(Optional)
Displays information about the active lines on the router.
Implementing Physical and Virtual Terminals