Sending Call Home Alert Group Messages Manually - Cisco ASR 9000 Series User Configuration Manual

Configuring Call Home
Command or Action
Step 2
call-home
Example:
RP/0/RSP0/CPU0:router (config) # call-home
Step 3 aaa-authorization [ username username]
Example:
RP/0/RSP0/CPU0:router (config-call-home) #
aaa-authorization username u1

Sending Call Home Alert group Messages Manually

This task is used to manually trigger Call Home alert group messages.
You can use the call-home send command to manually send a specific alert group message. Guidelines for
the CLI options of the command:
• Only the snapshot, configuration, and inventory alert groups can be sent manually. Syslog alert groups
• When you manually trigger a snapshot, configuration, or inventory alert group message and you specify
• When you manually trigger a snapshot, configuration, or inventory alert group message and do not
SUMMARY STEPS
1. call-home send alert-group snapshot [ profile name ]
2. call-home send alert-group configuration [ profile name ]
3. call-home send alert-group inventory [ profile name ]
DETAILED STEPS
Command or Action
Step 1 call-home send alert-group snapshot [ profile name ]
Example:
RP/0/RSP0/CPU0:router # call-home send alert-group
snapshot profile p1
cannot be sent manually.
a destination profile name, a message is sent to the destination profile regardless of the profile's active
status, subscription status, or severity setting.
specify a destination profile name, a message is sent to all active profiles that have either a normal or
periodic subscription to the specified alert group.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
Sending Call Home Alert group Messages Manually
Purpose
Enters Call Home configuration mode.
Enables AAA authorization. Specifies the
username for authorization.
Purpose
Sends a snapshot alert group message to one destination
profile if specified or to all subscribed destination profiles.
323