Transferring Licenses To A New Route Switch Processor 440 - Cisco ASR 9000 Series User Configuration Manual

Software Entitlement

Transferring Licenses to a new Route Switch Processor 440

To upgrade a route switch processor (RSP) to the RSP440 with your active licenses, perform this task.
SUMMARY STEPS
1. Save the original license file that you received from Cisco, in a USB drive or TFTP server.
2. save configuration running
3. Replace the RSP with the RSP440.
4. load
5. Add all licenses as described in
DETAILED STEPS
Command or Action
Step 1 Save the original license file that you received from Cisco, in a USB
drive or TFTP server.
Step 2 save configuration running
Example:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# save configuration running
tftp://192.10.10.10/mylicenses/rc_03132013
RP/0/RSP0/CPU0:router(config)# exit
RP/0/RSP0/CPU0:router# admin
RP/0/RSP0/CPU0:router(admin)# configure
RP/0/RSP0/CPU0:router(admin-config)# save configuration
running tftp://192.10.10.10/mylicenses/rc_admin_03132013
Step 3 Replace the RSP with the RSP440.
Step 4 load
Example:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# load
tftp://192.10.10.10/mylicenses/rc_03132013
RP/0/RSP0/CPU0:router(config)# exit
RP/0/RSP0/CPU0:router# admin
RP/0/RSP0/CPU0:router(admin)# configure
RP/0/RSP0/CPU0:router(admin-config)# load
tftp://192.10.10.10/mylicenses/rc_admin_03132013
Step 5
Add all licenses as described in
on page 88.
Adding a License for a New Feature, on page
Adding a License for a New Feature,
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
Configure Licenses Using Default Licensing
88.
Purpose
Stores the license files in a location that is
accessible to the new RSP after it is installed.
Saves the running-configuration from both global
configuration and administration configuration
modes to files. The administration configuration
contains user group information that is required for
the licenses.
Loads the saved running-configuration files on the
new RSP440. This must be done in both global
configuration mode and administration
configuration mode.
Installs the licenses to the new RSP.
93