Additional References - Cisco ASR 9000 Series User Configuration Manual

Configuring Disk Mirroring
Mirroring Logical Device:
Mirroring Logical Device2:
Physical Device
--------------------------------------------------------
disk0:
disk1:
compactflash:
(null)
disk0a:
disk1a:
compactflasha:
harddisk:
Mirroring Rommon Variable
BOOT_DEV_SEQ_CONF = disk0:;disk1:
BOOT_DEV_SEQ_OPER = disk0:;disk1:
MIRROR_ENABLE = Y
mirror verify Command Output: Example
RP/0/RSP0/CPU0:router# mirror verify
Mirror Verify Information for 0/0/CPU0.
========================================================
Primary device and secondary device are fully synchronized.

Additional References

The following sections provide references related to disk mirroring configuration.
Related Documents
Related Topic
Initial system bootup and configuration information
for a router using the Cisco IOS XR software
Information about user groups and task IDs
Cisco IOS XR command master list
Cisco IOS XR boot commands
State
Available
Available
Available
Available
Available
Available
Not Present
Available
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
disk0:
disk1:
Flags
Enabled
Enabled
Document Title
Cisco ASR 9000 Series Aggregation Services Router
Getting Started Guide
Configuring AAA Services on the Cisco ASR 9000
Series Router module of Cisco ASR 9000 Series
Aggregation Services Router System Security
Configuration Guide
Cisco ASR 9000 Series Aggregation Services Router
Commands Master List
Boot Commands on the Cisco ASR 9000 Series
Router module of Cisco ASR 9000 Series
Aggregation Services Router System Management
Command Reference
Additional References
83