Configuring And Activating Destination Profiles - Cisco ASR 9000 Series User Configuration Manual

Configuring and Activating Destination Profiles

Command or Action
Step 10
show call-home
Example:
RP/0/RSP0/CPU0:router# show call-home
Configuring and Activating Destination Profiles
You must have at least one activated destination profile for Call Home messages to be sent. The CiscoTAC-1
profile exists by default but is not active.
SUMMARY STEPS
1. configure
2. call-home
3. profile profile-name
4. destination address email email-address
5. destination message-size-limit max-size
6. destination preferred-msg-format {short-text | long-text | xml}
7. destination transport-method [ email | hhtp ]
8. active
9. commit
10. show call-home profile {all | profile-name}
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 call-home
Example:
RP/0/RSP0/CPU0:router(config)# call-home
RP/0/RSP0/CPU0:router(config-call-home)#
Step 3 profile profile-name
Example:
RP/0/RSP0/CPU0:router(config-call-home)# profile
my_profile
RP/0/RSP0/CPU0:router(config-call-home-profile)#
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
314
Purpose
Displays information about the system contacts.
Purpose
Enters call home configuration mode.
Enters call home profile configuration mode to
configure a new or existing profile.
Configuring Call Home