Grizzly G0699 Owner's Manual page 47

Blade Elevation Handwheel & Lock Knob:
Handwheel raises and lowers the blades. The
lock knob secures the handwheel to prevent it
from moving during operation.
Elevation Handwheel
Figure 74. Blade elevation control.
Sliding Table Lock Lever: Locks the sliding table
in position. When rotated to the left, the lock-
ing mechanism under the sliding table engages.
When the lever is rotated to the right, the lock
releases and allows the table to slide freely.
Lock
Lever
Figure 75. Sliding table locking mechanism.
Model G0699 (Mfd. Since 5/15)
& Lock Knob
Rip Fence Clamp Lever: Secures the rip fence to
the rip fence body.
Rip Fence Lock Lever: Clamps the rip fence
assembly in place on the fence rail.
Micro-Adjust Knob: Provides for fine-tune adjust-
ment for the width-of-cut (the rip fence lock lever
must be loose to use this).
Micro-Adjust Lock Knob: Clamps the rip fence
assembly to the fence rail and allows the use of
the micro-adjust knob.
Clamp Lever
Micro-Adjust
Lock Knob
Lock
Lever
Figure 76. Rip fence controls.
Micro-Adjust
Knob
-45-