Table of Contents
Advertisement
Manual Accuracy
We are proud to provide a high-quality owner's
manual with your new machine!
We made every effort to be exact with the instruc-
tions, specifications, drawings, and photographs
in this manual. Sometimes we make mistakes, but
our policy of continuous improvement also means
that sometimes the machine you receive is
slightly different than shown in the manual.
If you find this to be the case, and the difference
between the manual and machine leaves you
confused or unsure about something, check our
website for an updated version. We post current
manuals and manual updates for free on our web-
site at www.grizzly.com.
Alternatively, you can call our Technical Support
for help. Before calling, make sure you write down
the Manufacture Date and Serial Number from
the machine ID label (see below). This information
is required for us to provide proper tech support,
and it helps us determine if updated documenta-
tion is available for your machine.
Manufacture Date
Serial Number
-2-
INTRODUCTION
Contact Info
We stand behind our machines! If you have ques-
tions or need help, contact us with the information
below. Before contacting, make sure you get the
serial number and manufacture date from the
machine ID label. This will help us help you faster.
Grizzly Technical Support
1815 W. Battlefield
Springfield, MO 65807
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Machine Description
A sliding table saw is primarily used to rip and
crosscut sheet stock or panels in a production
setting. The sliding table saves time and increases
accuracy by removing the burden of sliding large
and heavy panels over a stationary table surface.
This saw can also be used as a traditional table
saw for most types of through-cuts.
The Model G0699 is equipped with a scoring
blade, which is a smaller blade located in front
of the main blade. It makes a shallow cut in the
workpiece in the opposite direction of the main
blade, greatly reducing tear-out and chipped
edges.
When using the sliding table saw as a traditional
table saw, the sliding table is locked in place and
the rip fence is then used to guide the workpiece
through the cut.
Model G0699 (Mfd. Since 5/15)
Advertisement
Table of Contents
